Acapulco Gold Auto was grown indoors by Kirsten in a 30.28L fabric pot using a custom Super Coco mix. From the start, this plant showed unusual growth and quickly became the dominant plant in the tent.
The main story of the diary is not subtle. She got big, got awkward, and demanded constant management through flower.
What stands out most in the source diary is her structure. Kirsten repeatedly notes the unusual growth pattern, the early triploid traits, the top-heavy frame, and the fact that the plant simply outgrew the available space.
This was not a tidy, low-maintenance indoor run.
Grow Setup
| Parameter | Details |
|---|---|
| Strain | Acapulco Gold Auto by WeedSeedsExpress |
| Grower | Kirsten |
| Grow Environment | Indoor |
| Grow Medium | Super Coco mix |
| Pot Size | 30.28L / 8 gallon fabric pot |
| Lighting | 100W Samsung diodes in veg, 100W Samsung diodes in flower |
| Tent | 4x4 Mylar tent |
| Air Movement | Oscillating fan |
| Nutrients | Ecothrive and Greenleaf Nutrients products |
| Training Techniques | LST, super-cropping, HST, defoliation, lollipopping, staking |
Grow Diary
Weeks 0-1 - Germination & Early Seedling
Kirsten started Acapulco Gold Auto directly in the final 30.28L fabric pot using a custom Super Coco mix.
The medium was made from 16L Canna Coco Professional Plus, 6L perlite, 5L worm castings, 3 cups ground cinnamon, a sprinkling of Great White Mycorrhizal Fungi blend, 3 cups diatomaceous earth, 4 cups Ecothrive Life Cycle, and 2 cups Ecothrive Charge.
The seed was planted straight into that mix with additional mycorrhizae added into the planting hole, then watered in lightly with mineral water. Germination was logged directly in substrate.
By week 1, the seedling was [2.54:cm] tall. Kirsten noted that it had 3 cotyledon leaves and also mentioned that the top layer of the medium needed more perlite, as it contained noticeably less than the rest of the pot.
Watering was still minimal at this stage and only done when dry. Logged conditions were 26 °C day temperature, 60% humidity, pH 6.5, and no smell.
Weeks 2-3 - Early Vegetative Development
By week 2, Kirsten was already calling this one another triploid. The plant was growing well and reached [12.7:cm], with the main concern being how to keep such a large pot properly watered in the heat.
Week 3 made the next issue obvious. The plant had reached [27.94:cm] and had already produced three tops.
Kirsten noted that there was not enough room to spread it horizontally as planned, so the grow would have to be managed vertically instead.
Weeks 4-5 - Vigour Builds Quickly
By week 4, Acapulco Gold Auto was [38.1:cm] tall. Kirsten described the growth as nice overall, but unusual and bendy. Even at this point, the structure did not look straightforward.
Week 5 brought a sharp jump in size, with the plant reaching [68.58:cm]. LST was underway, but concern around shape and height was clearly building. The smell was still only weak, but the plant was already becoming hard to ignore.
Weeks 6-7 - Structure Becomes a Problem
This is where the diary starts leaning into management mode. Kirsten described the plant as having an upside down Christmas tree shape and said the base would need staking because it was so top-heavy.
She also noted that proper LST was difficult because the main stem was extremely thick and could snap if pushed too far.
Super-cropping and HST were logged around this stage as the grow shifted toward control rather than simple maintenance.
Weeks 8-9 - Flower Begins and the Stretch Takes Over
By weeks 8 and 9, defoliation, super-cropping, and HST were all in play. The plant hit [157.48:cm] by week 9, which tells you exactly how quickly things escalated.
At this point, the size of the plant had become the defining issue. Kirsten was no longer just guiding growth. She was trying to keep it manageable inside a fixed indoor space.
Weeks 10-11 - Outgrowing the Tent
Kirsten wrote that the plant had grown out of control and that the lights could not be raised any further. The top of the plant was burning on the LEDs, and she had to rotate it to reduce the damage.
Even with that, she still noted that the plant looked good and expected a substantial amount by the end. That says a lot. The run had become awkward, but the plant was still pushing ahead strongly.
Weeks 12-13 - Big Plant, Bigger Headaches
By week 12, the logged height had reached [182.88:cm]. Kirsten called it an absolute beast, and the comments around this point suggest she expected dense buds and a strong finish.
Nutrient balance also became harder to read here. She noted that the plant had always been light green but was starting to yellow, so she top-dressed to keep it moving. By week 13, the plant had hit 79 inch.
Weeks 14-15 - Tent Dominance and Late Flower Stress
The final stretch was all about space and support. Kirsten wrote that the plant had spread over the entire tent and was blocking light from the other plants.
She added an extra 100W UVA/UVB lamp because the upper canopy was taking over nearly everything underneath.
Week 15 still logged the plant at 79 inch. Kirsten also said the leaves had gone crispy from the lights, although the buds themselves still looked fine.
Staking was logged here as well, which fits the overall pattern of this plant needing physical help late in the run.
Detailed Observations & Grower’s Reflections
The clearest takeaway from the diary is that Acapulco Gold Auto was a very large and awkward indoor plant.
Kirsten’s notes consistently focus on unusual structure, rapid vertical growth, top-heaviness, and the challenge of fitting the plant into the available space.
It also handled a lot of intervention. LST, HST, super-cropping, defoliation, lollipopping, and staking were all logged during the run. So while the plant was not easy in this setup, it remained workable enough to keep pushing forward.
Challenges & Solutions
The first challenge was structure. Early triploid growth, three tops, a thick main stem, and a top-heavy frame made this plant difficult to shape cleanly from the start.
The second challenge was size. Once the stretch kicked in properly, the plant outgrew the available light height and began burning on the LEDs.
Kirsten responded by rotating the plant, continuing training, and later adding extra lighting for the rest of the tent.
The third challenge was late-flower management. By the end, the plant had taken over the tent, blocked light from the other plants, and needed staking.
Kirsten also noted crispy leaves from light stress, though said the buds still looked fine.
Final Result and Strain Review
Based strictly on the source diary, Acapulco Gold Auto finished as an oversized, high-maintenance indoor plant that demanded far more space than expected.
It showed unusual early growth, became top-heavy, outgrew the lighting setup, and dominated the tent by late flower.
| Metric | Result |
|---|---|
| Logged Techniques | LST, super-cropping, HST, defoliation, lollipopping, staking |
| Final Dry Yield | Not stated in accessible source text |
| Wet Yield | Not stated in accessible source text |
| Smoke Profile | Not stated in accessible source text |
Ready to get these results? Buy Acapulco Gold Auto seeds here.
